PERFORMANCE GUIDELINES: 9. WALL AND CEILING FINISH

9.6 Drywall Surface Blemishes Including Blisters in Taped Joints, Trowel Marks, Excess Joint Compound and Dents or Gouges

Acceptable Performance/Condition

Interior finished drywall (excluding garages and unfinished areas) shall be free from blemishes (dents and gouges) at the time of first occupancy* and shall be installed according to the BC Building Code.

Conditions such as cracks, blisters in taped joints, trowel marks, excess joint compound, dents or tool gouges, that are readily noticeable when viewed under normal lighting conditions and from a normal viewing position of 1.8 m (6’) directly in front of the wall surface, are unacceptable.

Warranty Coverage

*Physical damage, such as dents and gouges, must have been reported on the pre-delivery inspection report (see Pre-Delivery Inspection).

• 12 months In-Home
• 15 months Common Property

Claim Response

Drywall surface blemishes not meeting the Acceptable Performance/Condition are to be rectified and refinished to match the original finish as closely as possible.

Maintenance Tip

No maintenance tips available